Senior Project and Thesis Reports (65)

• Brown, A., "Design of an Arm Pitching Machine with Curveball Capability," 2010
  
• Herman, T., "The Mechanical Strength of Flexible Solar Nanocomposites," 2010
  
• Maher, J., "Investigation of Bullfrog Hearts during Simulated Heart Attacks," 2010
  
• Adams, M.T., "The Photogrammetry of Bullfrog Hearts," 2009
   
• Hopengarten, S.P., "Design and Fabrication of a Full Suspension Mountain Bike Suspension System," 2009
   
• Moriaty, M.A., "Design of a Handheld Pharmaceutical Design," 2009
   
• Adam, B., "Pico OWC1 Wave Energy Power Plant," 2008
   
• Mrazek, J., "Design of an Ice Hockey Goal Sensor," 2008
   
• Salemo, A. "Design of an Adaptive Hockey Puck for the Visually Impaired," 2008
   
• Wood, C.D., "Morphology of Advanced Nanocomposites in Novel Solar Cell Design," 2008
   
• Blythe, B.W., "Design of an Magneto-Rheological Auxiliary Brake System for Heavy Capacity Automotive Vehicles," 2007
   
• Kanagaki, G., "Investigating Magneto-Rheological Fluids," 2007
   
• Single, G.W., "Inventing and Developing a Medical Device to Aid in an Emergency Cricothyroidotomy Procedure," 2007
   
• Burr, M.S., "Design of an Exercise Mechanism for Nonivasive Magetocardiography," 2006
   
• Goodman, A., "PHotogrammetry of Bullfrog Hearts," 2006
   
• Spicer, C., "Design of an Adhesion Tester for High Temperature Superconductors," 2006
   
• VanWoeart, M., "Investigation of Snowboard Dynamics," 2006
   
• Beal, J., "Design of an Adjustable Sled to be used in Sled Hockey," 2005
   
• Robertson, Douglas, "The Design and Construction of a Composite RC Boat Hull," 2005
   
• Worth, Matthew, "Shoulder Rehabilitation and Stabilization: The Creation of a Rehabilitation Brace for the Aid in Shoulder Dislocations," 2005
   
• Sanders, G., "Design of a six-degree-of-freedom Stewart Platform Load Frame for Studying the Kinetics of the Spine," 2004
   
• Grieco, A., "Photogrammetry of Bullfrog Hearts," 2004
   
• Hilbert, M., "Design of a Dual Suspension Cross Country Mountain Bike Frame," 2004
   
• Maleszweski, J., "Designing a Fly Rod," 2003
   
• Robinson, S., "Measuring Myocardial Deformation in Bullfrog Hearts," 2003
   
• Pasch, A., "Restoration of a 1931 Ford Model A Engine and Transmission design of an Alternative Camshaft," 2002
   
• Kimball, K., "Design and Fabrication of a Composite Body for a Formula 1 SAE Car," 2002
   
• Howe, W., "The Design of a Drive Train for the 2002 Formula Car," 2002
   
• Herzlinger, J., "International Virtual Design Studio: design of an Autonomous Vehicle," 2002
   
• Pasch, A., "International Virtual Design Studio: design of an Autonomous Vehicle," 2002
   
• Bowers, J., "International Virtual Design Studio Project: Design and construction of a Machine that Autonomously Scaled a Wall, Avoided Holes, and Found a Door to Reach the Finish Line," 2002
   
• Briody, S., "International Virtual Design Studio Project: Design and construction of a Machine that Autonomously Scaled a Wall, Avoided Holes, and Found a Door to Reach the Finish Line," 2002
   
• Grant, M., "Design of Air INtake Manifold and Fuel Injection System," 2002
   
• Denema, P., "The Design and Construction of a Mechanical Fountain," 2001
   
• Gretten, M., "Autonomous walking Quadruped Robot," 2001
   
• Fontaine, R., "Design of Autonomous Quadruped Walking Robot - IVDS France," 2000
   
• Perrucci, S., "Enhancing the Thermal Properties of Carbon Fiber Plastics," 2000
   
• Roy, B., "International Virtual design Competition (Turkey): An Autonomous Robot Design," 2000
   
• Spindler-Ranta, S., "International Virtual Design Studio 2000 (Turkey): Team 2," 2000
   
• Williams, G., "Mechanical Engineering Design (IVDS Turkey): Team 3," 2000
   
• Gretten, M., "Design and Modification of an Autonomous Walking Quadruped Robot: IVDS France," 2000
   
• Poindexter, D., "International Virtual Design Studio Project 1998-1999," 1999.
   
• Haynes, P., "IVDS '98: The Fire Extinguishing Robot," 1999.
   
• Pincus, A., "Design and Production of a Machine that Autonomously Sought Out and Extinguished Flames," 1999
   
• Flynn, P., "I.V.D.S. Team 1, Flame Extinguishing Robot," 1999
   
• Kimball, C., "International Virtual Design Studio: Design and Manufacture of a Mechatronic Ladder Crossing Machine," 1998.

• Kriz, S.A., "International Virtual Design Project: The Design of a Quadruped Walking Robot," 1998.

• Sandman, J., "Stereolithographic Modeling of a Locomotive Turbocharger," 1998.

• Saunders, K.M.., "International Virtual Design Project: The Design of a Quadruped Walking Robot," 1998.

• Hahl, J., "Union's First Virtual Design Project: To Design a Vehicle Without Wheels, or Wheel-Like Motion," 1997.

• McMurtry, C., "International Virtual Design Studio: Design of a Vehicle Without Wheels, Project I, The 'Pusher'," 1997.

• Smallwood, B., "Union's First Virtual Design Project: To Design a Vehicle Without Wheels, or Wheel-Like Motion," 1997.

• Schnepel, M., "Design Methodology for a Down Hill Mountain Bike," 1997.

• Sobczak, K., "International Virtual Design Studio: Design of a Vehicle Without Wheels, Project I, The 'Pusher'," 1997.

• Frye, J., "Design of the Formula SAE Frame," 1996.

• Robertson, D., "Design of Instrumentation for Measuring the Force Exerted by a Crew Team," 1996

• Sadd, D.L., "Design and Building of a Quasi-Static Impact Pendulum," 1996

• Crayon, D., "Design and Fabrication of Suspension System for the 1995 Mini Baja Competition Vehicle," 1995.

• Julicher, B., "Design and Construction of the Formula SAE Frame," 1995

• Miller, J.R., "The Design of an Airgun Facility to Test Dynamic Impacts on Composite Materials," 1995.

• Pierson, J.A., "Design of a Carbon Fiber Composite Mast," 1995.

• Rice, W., "Microgravity Countermeasures Device," 1995

• Schell, B.W., "Design and Construction of SAE Mini Baja," 1995.

• Troy, J., "Design and Construction for the Suspension for the Formula SAE Car," 1995

• Weaver S.A., "The Design and Construction of a Torsional Load Cell," 1995.
   

Updated 20 August 2009