Select Reports:
Bucinell, R.B., Kimball, B., "SPA Intensifier: Design and Finite Element Analysis," Automated Dynamics Corporation, 12 March 2009.
Bucinell, R.B., “Final Report: Acquisition of Instrumentation Used for the Non-Contact Measurement of Stains and Displacements,” National Science Foundation, Research Summary, (June 2003)
Bucinell, R.B., “Acquisition of Instrumentation Used for the Non-Contact Measurement of Stains and Displacements,” National Science Foundation, Research Summary, (January 2002)
Bucinell, R.B., “Laboratory Testing of FRP Composite Materials,” Ryan-Biggs Associates, P.C., RBA Project 6857.3, (September 2001)
Bucinell, R.B., “Instrumentation Used for the Non-Contact Measurement of Strains and Displacements,” National Science Foundation, Award CMS-0116494 (August 2001)
Bucinell, R.B., “Thermoplastic Composite Feed Lines,” NASA Marshall Space Flight Center, (December 2000)
Bucinell, R.B., "Composite Material Fabrication and Evaluation Facility," National Science Foundation, Final Report for Award # 9850560, (July 2000)
Bucinell, R.B., "Evaluation of the Effect of Tow Size on Mechanical Test Specimen Configuration for Plain weave Carbon Fiber Reinforced Plastic Composite Coupons," Boeing Commercial Airplane Group, Seattle, WA, (May 1999).
Bucinell, R.B., "Evaluation of Composite Material Bridge repair Systems," New York State Department of Transportation, Transportation research and Development Bureau, Albany, NY, (June 1999).
Bucinell, R.B., "Evaluation of the Composite Column Wrap Material Systems Used on the Owego Bridge," New York State Department of Transportation, Transportation research and development Bureau, Albany, NY, (April 1999).
Bucinell, R.B., "Damage Accumulation in Closed Cross-Section Composite Structures Subjected to Compressive Loading," Summer Faculty Fellowship Final report, NASA Langley Research Center, NASA-CR 207634, (1998).
Bucinell, R.B., “Development of Computer Models for the Assessment of Foreign Body Impact Events on Composite Structures,” Grant NAG8-1144, NASA Marshall Space Flight Center, January 1997.
Bucinell, R.B., “Finite Element Modeling of the Thermographic Inspection for Composite Materials,” Summer Faculty Fellowship Final Report, NASA Marshall Space Flight Center, NASA-CR 205205, October 1996.
Bucinell, R.B., “Damage Accumulation in Closed Cross-Section, Laminated, Composite Structures,” Summer Faculty Fellowship Final Report, NASA Marshall Space Flight Center, NASA-CR 199830, February 1996
Bucinell, R.B., “Foreign Body Impact Event Damage Formation in Composite Structures,” Summer Faculty Fellowship Final Report, Marshall Space Flight Center, NASA-CR 196533, October 1994.
Bucinell, R.B., “Evaluation of the PGW Natural Gas Facility Pipe Support Failure,” Innotech TFR 12-91-01, I-T¢an Yu and Associates, Inc., December 1991
Bucinell, R.B., “Use of Polymeric Composite Materials for Silencing Navy Gear Cases,” MSC TFR 8701, David Taylor Research Center, November 1991.
Bucinell, R.B., “Fracture Mechanics Evaluation of the Penguin Gas Bottle,” Innotech TFR 1091-01, Carleton Technologies Incorporated, October 1991.
Bucinell, R.B., “Advanced Composite Materials Evaluation: Thermal Performance of Carbon-Carbon and Metal Matrix Composites in Radiator Fin Applications,” MSC TPR 3142/1428, Naval Surface Warfare Center, N60921-86-C-0236, February 1990.
Bucinell, R.B., “IR&D final Report: Damage Initiation, Propagation, Protection, and Detection in Filament Wound Structures,” Hercules Aerospace DDR 89107-3, November 1989.
Bucinell, R.B., “Small ICBM TVA Helium gas Bottle Fracture Analysis: Final Report,” Hercules Aerospace, 1988.
Bucinell, R.B., Nuismer, R.J., “Investigation of Cracks Forming and Propagating in Propellant Mixer Blades,” Hercules Aerospace, 1987.
Updated 20 August 2009